BBNTY - DIESEL FUEL OIL (D2) (D1)

  • MSDS: BBNTY
  • Manufacturer: NEVADA REFINING CO
  • Product Name: DIESEL FUEL OIL (D2) (D1)
  • National Stock Number: 9140-00F003797
Product Identification

Product ID:DIESEL FUEL OIL (D2) (D1)
MSDS Date:01/01/1987
FSC:9140
NIIN:00F003797
MSDS Number: BBNTY

Responsible Party
NEVADA REFINING CO/TONOPAH, NEVADA 89049

Emergency Phone: (800) 424-9300

Cage: 6W101

Contractor
NEVADA REFINING CO/TONOPAH, NEVADA 89049

Cage: 6W101

Ingredients

PETROLEUM DISTILLATES

Fraction By Weight: 100%

ACGIH TLV: 100 PPM

Hazards

Effects of Overexposure:SLIGHTLY IRRITATING TO EYES/SKIN. AVOID
BREATHING VAPORS.

First Aid

First Aid:WASH EXPOSED SKIN WITH SOAP AND WATER. IF INGESTED, DON'T
INDUCE VOMITING. CALL PHYSICIAN IMMEDIATELY.

Fire Fighting

Flash Point:175 (PMCC)
Lower Limits:0.7%
Upper Limits:5%
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL OR CO2 EXTINGUISHER.
Fire Fighting Procedures:DON'T USE DIRECT WATER STREAM. PRODUCT WILL
FLOAT/RE-IGNITE.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION FROM SPILL
AREA. WATER SPRAY MAY BE USED TO FLUSH SPIS AWAY FROM IGNITION
SOURCES.

Handling

Handling and Storage Precautions:STORE IN COOL, SEALED CONTAINERS AWAY
FROM SOURCES OF HEAT/SPARKS. EMPTY DRUMS CONTAINING PRODT RESIDUES
SHOULD BE CONSIDERED HAZ. UNTIL CLEANED

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED AIR SUPPLY RESPIRATOR.
Ventilation:PROVIDE LOCAL EXHAUST/MECH VENT. TO KEEP BELOW TLV/LEL.
Protective Gloves:NITRILE RUBBER
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:IMPERVIOUS CLOTHING AND BOOTS.
Supplemental Safety and Health
MELTING POINT = -30F. MSDS DATE: 1 NOV 85.

Chemical Properties

Boiling Pt:B.P. Text:300-700F
Vapor Pres:0.5
Vapor Density:5.5
Spec Gravity:0.81
Evaporation Rate & Reference:(ETHER) = 150
Solubility in Water:INSOLUBLE
Appearance and Odor:PALE YELLOW OILY LIQUID
Percent Volatiles by Volume:100%

Stability

Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAME
Hazardous Decomposition Products:CO2 AND CO MAY FORM DURING COMBUSTION.

Disposal

Waste Disposal Methods:USE ABSORBENT MATERIALS TO SOAK UP SMALL VOLUME
SPILLS. SPILLED DIESEL MAY BE RECLAIMED OR INCINERATED IN
ACCORDANCE WITH APPLICABLE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.